After many hours, I have completed the cleaning and rebuilding of the Apple Power Mac G4. This was a much more difficult process than I had expected it to be, but I still enjoyed it.
Using an electric duster, I sprayed air at the electrical components to remove much of the debris. This ended up working really well and I only had to use a small amount of isopropyl alcohol to clean some of the tougher spots.
09 July 2019
04 July 2019
Power Mac G4 Part 2: Teardown
Last week I mentioned how easy it was to get inside the Power Mac G4 with its latch and hinged side. This remains true, but to completely tear down the machine, it was a hell of a lot more difficult than a modern Windows PC. But this needed to be done so I could get the interior of this computer as clean as possible.
I started with the DVD drive because it's the most easily accessible component. It's not screwed in or held in place with latches or anything.
I started with the DVD drive because it's the most easily accessible component. It's not screwed in or held in place with latches or anything.
27 June 2019
New Old Computer: Apple Power Mac G4 from 2000
To post more often, I'm switching to Tuesdays and Thursdays so that I only have to do two a week. This should make this website more manageable and give me more time to post interesting stuff.
Last week I received an old Apple computer that I knew absolutely nothing about. I have very little experience with Apple products, but I've always liked the way their older computers looked. So when my brother-in-law offered me a free Power Mac G4, I happily accepted it not knowing whether it would work or not.
Last week I received an old Apple computer that I knew absolutely nothing about. I have very little experience with Apple products, but I've always liked the way their older computers looked. So when my brother-in-law offered me a free Power Mac G4, I happily accepted it not knowing whether it would work or not.
25 June 2019
Commodore Project 64 Part 8: Retr0bright Phase 4
At last, I've reached a point where I have something assembled. It's not much, but I'm still excited! I began phase 4 of retr0brighting hoping it would be the phase that finished it. I made a few changes to the method to increase the chances of it being successful.
First, the top and bottom of the chassis were painted with a thick layer of 40 volume creme. I then wrapped the parts in clear plastic wrap, which I did for the sun attempt but not the UV light. This would prevent the creme from drying much.
This time around I wanted to focus on the sides, so I set up both lights to be as close as possible and left it like this for twelve hours. The following twelve hours were used for the other side, and then I let the UV lights shine on the rest for another twenty-four hours.
So was forty-eight hours enough?
20 June 2019
Commodore 16 Part 2: Cleaning
I spend more time cleaning things than I do using them. It's my favorite part of collecting. I want my machines to look as new as I can possibly make them so that I can be proud to show it to others. Also no one wants to touch a filthy keyboard.
After disassembly, cleaning a Commodore machine isn't difficult. With all of the electronics out of the way, you can use soap and water to scrub the heck out of the plastic parts of the chassis.
After disassembly, cleaning a Commodore machine isn't difficult. With all of the electronics out of the way, you can use soap and water to scrub the heck out of the plastic parts of the chassis.
18 June 2019
Commodore 16 Part 1: Teardown
Since Project 64 is on hold until some needed parts arrive, I figured it's time to take a look at other computers in my collection. These haven't been cleaned or worked on, only tested for power.
Here's a Commodore 16. At first glance, it looks a lot like the Commodore 64, but it's got a black chassis and grey keys. This computer came out after the C64, but is actually the next version of the Commodore Vic-20. It's kind of confusing, which might be why this didn't sell all that well in North America. It was apparently pretty big in Europe though.
Here's a Commodore 16. At first glance, it looks a lot like the Commodore 64, but it's got a black chassis and grey keys. This computer came out after the C64, but is actually the next version of the Commodore Vic-20. It's kind of confusing, which might be why this didn't sell all that well in North America. It was apparently pretty big in Europe though.
14 June 2019
Meet the Machine: (Former) Toolbox PC
My original plan for the Meet the Machine series was to discuss the vintage computers I have, but for very sentimental reasons, I'm expanding the concept a bit. The computer in this post was built in 2013, but it played a significant role in my life. This is going to be a long post, so buckle in.
![]() |
| Behold, the Toolbox PC before it had an operating system. |
I had built a few PCs before this one, so I had a pretty good grasp on it. But those PCs were designed to stay in one place. At the time, I was going on extended trips and thus didn't have access to my Steam library. At first I brought an Xbox 360, which was fun, but PC games allowed for so much more.
So I needed a PC that I could take with me that would withstand a bit of abuse. I expected this thing to be dropped a few times (and it was). I spent a few weeks searching the Internet for PC cases built for abuse and nothing at a reasonable cost turned up. What I did find were some interesting custom cases, but they too were either cost prohibitive or designed more for style than utility.
Then the idea hit me: the Toolbox PC. I could get a rugged toolbox built with strong materials and add shock absorbers to the components.
Subscribe to:
Posts (Atom)








